42. "Nov Baseline" November baseline (like October "Oct Base (JT 4cm)", but with some beamline updates.) JD clad with 7 cm borated poly and 3 cm Pb. 4 cm borated poly inside JT and on back face to 3.5 m, no front facing on JT. Stepped JF, front R=150 cm, clad with 10 cm borated poly and 3 cm Pb. 45. "Nov New JM" FCAL plug: Put a 300mm thick (in Z) poly ring on the front of the FCAL with inner radius = 50 mm and outer radius=185mm. LAr plug: Put a 50 mm (in R) poly cylinder with inner radius = 135 mm in front of the first ring i.e. clad the LAr wall facing the beampipe. Pump plug: Put a 50 mm poly ring on the front of the pump with inner radius = 43 mm and outer radius = 110 mm. Disk: The JN disk should of course go down to the cylinder ring i.e. to a radius = 185mm. (The inner radius of the LAr is 185mm with 47 mm in the FCAL region. The outer radius of the neg pump is 89 mm.) Small Wheel Large Wheel Back Wheel Barrel A B C D E F G CSC TGC MDT-in MDT-out MDT-back RPC-in RPC-out Nov Baseline N < 100 keV 40200.0 28100.0 3280.0 4228.0 1956.0 3717.0 4070.0 Nov New JM N < 100 keV 39700.0 27800.0 3300.0 4170.0 1975.0 3682.0 3979.0 Change in % -1.2 -1.1 0.6 -1.4 1.0 -0.9 -2.2 Nov Baseline N > 100 keV 31700.0 11300.0 1400.0 992.0 594.0 793.0 750.0 Nov New JM N > 100 keV 31300.0 11100.0 1380.0 1030.0 545.0 768.0 721.0 Change in % -1.3 -1.8 -1.4 3.8 -8.2 -3.2 -3.9 Nov Baseline Photons 24200.0 10700.0 11600.0 4680.0 1310.0 1570.0 1640.0 Nov New JM Photons 23500.0 10500.0 11500.0 4640.0 1290.0 1540.0 1580.0 Change in % -2.9 -1.9 -0.9 -0.9 -1.5 -1.9 -3.7 Nov Baseline Electrons 215.0 99.0 24.9 20.6 8.0 12.0 13.8 Nov New JM Electrons 187.0 105.0 30.1 20.9 8.9 15.0 12.4 Change in % -13.0 6.1 20.9 1.5 11.4 25.0 -10.1 Nov Baseline Muons 117.0 22.1 9.3 3.1 2.3 1.0 9.6 Nov New JM Muons 122.0 20.7 10.0 3.3 2.5 0.8 11.0 Change in % 4.3 -6.3 7.5 6.4 10.0 -19.3 14.9 Nov Baseline Protons 69.2 18.0 11.6 9.6 0.4 2.6 4.4 Nov New JM Protons 68.6 18.0 11.6 9.9 0.8 2.7 5.4 Change in % -0.9 0.0 0.0 3.5 77.9 4.3 20.9 Nov Baseline Hadrons 7450.0 1550.0 535.0 397.0 29.5 147.0 369.0 Nov New JM Hadrons 7300.0 1510.0 530.0 397.0 29.4 146.0 364.0 Change in % -2.0 -2.6 -0.9 0.0 -0.3 -0.7 -1.4 Nov Baseline MDT rate 442.8 178.1 151.7 66.4 19.0 23.9 30.6 Nov New JM MDT rate 432.6 175.3 151.6 66.2 19.1 23.9 30.8 Change in % -2.3 -1.6 -0.1 -0.3 0.7 -0.2 0.6 Nov Baseline RPC rate 259.1 93.8 75.6 34.3 9.6 12.1 18.2 Nov New JM RPC rate 253.8 92.5 76.1 34.4 9.9 12.3 18.8 Change in % -2.1 -1.4 0.7 0.2 2.8 1.5 3.4 Nov Baseline Penetrating 152.0 45.7 27.2 14.5 3.9 5.1 10.9 Nov New JM Penetrating 149.7 45.3 28.1 14.7 4.3 5.5 11.8 Change in % -1.5 -0.9 3.5 1.7 9.1 6.0 8.0 JM1: Remove the LAr plug but let the disk go down to a radius of 135 mm. JM2: Remove the pump plug. JM3: Change the thickness of the FCAL plug from 300mm to 200 mm. JM4: Change the thickness of the FCAL plug from 300mm to 200 mm and increase the inner radius from 50 to 65mm. JM5: Decrease outer radius of the pump plug from 110 to 90 mm + change the thickness of the FCAL plug from 300 to 200 mm + change the inner radius of the FCAL plug from 50 to 65 mm. JM6: Change 10% poly li to 5%. Not simulated because it was 5% all along. JM7: Change poly li to polyboron JM8: Reduce the FCAL plug thickness to 100 mm Feb Base: FCAL plug: Put a 100mm thick (in Z) poly ring on the front of the FCAL with inner radius = 65 mm and outer radius=185mm. LAr plug: Put a 50 mm (in R) poly cylinder with inner radius = 135 mm in front of the first ring i.e. clad the LAr wall facing the beampipe. Pump plug: Removed Disk: The JN disk should of course go down to the cylinder ring i.e. to a radius = 135 mm. JMPP: Pump plug restored to JM JMDPB: JM disk changed to PBoron noJMFCPl: No FCAL plug REGION: ID Low Z - Inner ZLO,ZHI,RLO,RHI: 0. 200. 5. 30. RATES (kHz/cm^2) Neutrons N > 100keV Photons Electrons ------------------- ------------------- ------------------- ------------------- Nov Baseline 0.366E+04 1% 1.00 0.211E+04 2% 1.00 0.291E+05 4% 1.00 0.539E+04 4% 1.00 Nov New JM 0.357E+04 1% 0.98 0.208E+04 2% 0.99 0.292E+05 4% 1.00 0.538E+04 4% 1.00 Dec Baseline 0.360E+04 1% 1.00 0.209E+04 2% 1.00 0.293E+05 4% 1.00 0.543E+04 4% 1.00 Dec JM1 0.385E+04 1% 1.07 0.217E+04 2% 1.04 0.296E+05 4% 1.01 0.541E+04 4% 1.00 Dec JM2 0.361E+04 1% 1.00 0.210E+04 2% 1.01 0.294E+05 4% 1.00 0.536E+04 4% 0.99 Dec JM3 0.358E+04 1% 0.99 0.207E+04 2% 0.99 0.292E+05 4% 1.00 0.527E+04 4% 0.97 Dec JM4 0.359E+04 1% 1.00 0.209E+04 2% 1.00 0.291E+05 4% 0.99 0.531E+04 4% 0.98 Dec JM5 0.361E+04 1% 1.00 0.210E+04 2% 1.01 0.293E+05 4% 1.00 0.538E+04 4% 0.99 Dec JM8 0.364E+04 1% 1.01 0.211E+04 2% 1.01 0.295E+05 4% 1.01 0.529E+04 4% 0.98 Feb Baseline 0.361E+04 1% 1.00 0.210E+04 2% 1.00 0.295E+05 4% 1.00 0.539E+04 4% 1.00 JMPP 0.361E+04 1% 1.00 0.210E+04 2% 1.00 0.296E+05 3% 1.00 0.538E+04 4% 1.00 JMDPB 0.349E+04 1% 0.97 0.208E+04 2% 0.99 0.294E+05 4% 1.00 0.526E+04 4% 0.98 noJMFCPl 0.362E+04 1% 1.00 0.212E+04 2% 1.01 0.294E+05 4% 1.00 0.526E+04 4% 0.98 TP43 Compare 0.334E+04 1% 0.93 0.196E+04 2% 0.93 0.284E+05 4% 0.96 0.477E+04 4% 0.88 JM1: Remove the LAr plug but let the disk go down to a radius of 135 mm. JM2: Remove the pump plug. JM3: Change the thickness of the FCAL plug from 300mm to 200 mm. JM4: Change the thickness of the FCAL plug from 300mm to 200 mm and increase the inner radius from 50 to 65mm. JM5: Decrease outer radius of the pump plug from 110 to 90 mm + change the thickness of the FCAL plug from 300 to 200 mm + change the inner radius of the FCAL plug from 50 to 65 mm. JM6: Change 10% poly li to 5%. Not simulated because it was 5% all along. JM7: Change poly li to polyboron JM8: Reduce the FCAL plug thickness to 100 mm Feb Base: FCAL plug: Put a 100mm thick (in Z) poly ring on the front of the FCAL with inner radius = 65 mm and outer radius=185mm. LAr plug: Put a 50 mm (in R) poly cylinder with inner radius = 135 mm in front of the first ring i.e. clad the LAr wall facing the beampipe. Pump plug: Removed Disk: The JN disk should of course go down to the cylinder ring i.e. to a radius = 135 mm. JMPP: Pump plug restored to JM JMDPB: JM disk changed to PBoron noJMFCPl: No FCAL plug REGION: ID High Z - Inner ZLO,ZHI,RLO,RHI: 300. 340. 5. 30. RATES (kHz/cm^2) Neutrons N > 100keV Photons Electrons ------------------- ------------------- ------------------- ------------------- Nov Baseline 0.446E+04 5% 1.00 0.253E+04 7% 1.00 0.371E+05 10% 1.00 0.767E+04 1% 1.00 Nov New JM 0.446E+04 8% 1.00 0.253E+04 9% 1.00 0.401E+05 12% 1.08 0.770E+04 1% 1.00 Dec Baseline 0.450E+04 7% 1.00 0.256E+04 9% 1.00 0.403E+05 12% 1.00 0.772E+04 1% 1.00 Dec JM1 0.633E+04 14% 1.41 0.323E+04 13% 1.26 0.412E+05 12% 1.02 0.784E+04 1% 1.02 Dec JM2 0.454E+04 7% 1.01 0.256E+04 9% 1.00 0.407E+05 12% 1.01 0.770E+04 1% 1.00 Dec JM3 0.451E+04 7% 1.00 0.254E+04 9% 0.99 0.404E+05 12% 1.00 0.772E+04 1% 1.00 Dec JM4 0.454E+04 7% 1.01 0.257E+04 9% 1.01 0.399E+05 12% 0.99 0.770E+04 1% 1.00 Dec JM5 0.452E+04 8% 1.01 0.255E+04 9% 1.00 0.406E+05 12% 1.01 0.773E+04 1% 1.00 Dec JM7 0.435E+04 7% 0.97 0.253E+04 9% 0.99 0.408E+05 12% 1.01 0.753E+04 1% 0.98 Dec JM8 0.461E+04 8% 1.02 0.261E+04 9% 1.02 0.409E+05 12% 1.02 0.770E+04 1% 1.00 Feb Baseline 0.447E+04 7% 1.00 0.259E+04 9% 1.00 0.415E+05 12% 1.00 0.764E+04 1% 1.00 JMPP 0.446E+04 7% 1.00 0.261E+04 9% 1.00 0.416E+05 12% 1.00 0.777E+04 1% 1.02 JMDPB 0.403E+04 7% 0.90 0.260E+04 9% 1.00 0.422E+05 12% 1.02 0.757E+04 1% 0.99 noJMFCPl 0.471E+04 7% 1.05 0.277E+04 9% 1.07 0.417E+05 12% 1.00 0.773E+04 1% 1.01 TP43 Compare 0.461E+04 4% 1.03 0.245E+04 7% 0.95 0.378E+05 10% 0.91 0.866E+04 4% 1.13 JM1: Remove the LAr plug but let the disk go down to a radius of 135 mm. JM2: Remove the pump plug. JM3: Change the thickness of the FCAL plug from 300mm to 200 mm. JM4: Change the thickness of the FCAL plug from 300mm to 200 mm and increase the inner radius from 50 to 65mm. JM5: Decrease outer radius of the pump plug from 110 to 90 mm + change the thickness of the FCAL plug from 300 to 200 mm + change the inner radius of the FCAL plug from 50 to 65 mm. JM6: Change 10% poly li to 5%. Not simulated because it was 5% all along. JM7: Change poly li to polyboron JM8: Reduce the FCAL plug thickness to 100 mm Feb Base: FCAL plug: Put a 100mm thick (in Z) poly ring on the front of the FCAL with inner radius = 65 mm and outer radius=185mm. LAr plug: Put a 50 mm (in R) poly cylinder with inner radius = 135 mm in front of the first ring i.e. clad the LAr wall facing the beampipe. Pump plug: Removed Disk: The JN disk should of course go down to the cylinder ring i.e. to a radius = 135 mm. JMPP: Pump plug restored to JM JMDPB: JM disk changed to PBoron noJMFCPl: No FCAL plug REGION: ID High Z - Outer ZLO,ZHI,RLO,RHI: 300. 340. 30. 100. RATES (kHz/cm^2) Neutrons N > 100keV Photons Electrons ------------------- ------------------- ------------------- ------------------- Nov Baseline 0.262E+04 3% 1.00 0.978E+03 6% 1.00 0.798E+04 6% 1.00 0.413E+03 5% 1.00 Nov New JM 0.252E+04 2% 0.96 0.951E+03 5% 0.97 0.816E+04 4% 1.02 0.407E+03 4% 0.98 Dec Baseline 0.254E+04 2% 1.00 0.957E+03 5% 1.00 0.821E+04 4% 1.00 0.410E+03 4% 1.00 Dec JM1 0.289E+04 1% 1.14 0.103E+04 4% 1.07 0.854E+04 5% 1.04 0.405E+03 4% 0.99 Dec JM2 0.254E+04 2% 1.00 0.953E+03 5% 1.00 0.818E+04 4% 1.00 0.405E+03 4% 0.99 Dec JM3 0.253E+04 2% 1.00 0.956E+03 5% 1.00 0.817E+04 4% 1.00 0.406E+03 4% 0.99 Dec JM4 0.200E+04 1% 0.99 0.559E+03 2% 1.00 0.380E+04 3% 1.00 0.294E+03 3% 0.99 Dec JM5 0.202E+04 1% 1.00 0.561E+03 2% 1.00 0.384E+04 3% 1.01 0.293E+03 3% 0.99 Dec JM7 0.200E+04 1% 0.99 0.555E+03 2% 0.99 0.381E+04 3% 1.00 0.291E+03 2% 0.99 Dec JM8 0.253E+04 2% 1.00 0.954E+03 5% 1.00 0.813E+04 4% 0.99 0.405E+03 4% 0.99 Feb Baseline 0.249E+04 2% 1.00 0.947E+03 5% 1.00 0.823E+04 4% 1.00 0.401E+03 4% 1.00 JMPP 0.252E+04 2% 1.01 0.961E+03 5% 1.01 0.831E+04 4% 1.01 0.406E+03 4% 1.01 JMDPB 0.212E+04 1% 0.85 0.955E+03 6% 1.01 0.903E+04 5% 1.10 0.395E+03 4% 0.99 noJMFCPl 0.249E+04 2% 1.00 0.944E+03 5% 1.00 0.822E+04 4% 1.00 0.399E+03 4% 1.00 TP43 Compare 0.294E+04 4% 1.18 0.963E+03 9% 1.02 0.785E+04 7% 0.96 0.384E+03 5% 0.96 Rates of neutrons > 100 keV in MHz/cm**2 ------------------------------------------------- | Z(cm): | 0-200 cm | 200-300 cm | 300-340 cm | ------------------------------------------------------------------- R = | TP43 | 0.493 1.00 | 0.682 1.00 | 0.963 1.00 | 30 -100 cm | Feb. baseline | 0.567 1.15 | 0.748 1.10 | 0.955 0.99 | | No FCAL plug | 0.566 1.15 | 0.739 1.08 | 0.944 0.98 | ------------------------------------------------------------------- R = | TP43 | 1.96 1.00 | 1.90 1.00 | 2.45 1.00 | 30 -100 cm | Feb. baseline | 2.10 1.07 | 2.01 1.06 | 2.62 1.07 | | No FCAL plug | 2.12 1.08 | 2.09 1.10 | 2.77 1.13 | ------------------------------------------------------------------- Rates of photons in MHz/cm**2 ---------------------------------------------- | Z(cm): | 0-200 cm | 200-300cm | 300-340cm | ---------------------------------------------------------------- R = | TP43 | 3.76 1.00 | 5.67 1.00 | 7.85 1.00 | 30 -100 cm | Feb. baseline | 3.90 1.04 | 6.17 1.09 | 8.25 1.05 | | No FCAL plug | 3.87 1.03 | 6.13 1.08 | 8.22 1.05 | ---------------------------------------------------------------- R = | TP43 | 28.4 1.00 | 26.4 1.00 | 37.8 1.00 | 30 -100 cm | Feb. baseline | 29.5 1.04 | 29.1 1.10 | 41.6 1.10 | | No FCAL plug | 29.4 1.04 | 29.1 1.10 | 41.7 1.10 | ----------------------------------------------------------------